2022 Latest 100% Exam Passing Ratio - NS0-173 Dumps PDF
Pass Exam With Full Sureness - NS0-173 Dumps with 62 Questions
Network Appliance NS0-173 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION 15
Click the Exhibit button.
The total number of servers that a Cisco UCS Mini chassis supports is set to a maximum of how many hosts as shown in the exhibit?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 16
A client has a requirement to set up a FlexPod Datacenter with the NetApp fabric MetroCluster architecture. You want to enable connectivity between the deployments.
In this design, which two components are required to accomplish this task? (Choose two.)
- A. Cisco MDS 9300 switches
- B. Cisco Nexus 9000 switches
- C. Cisco Nexus 7000 switches
- D. Cisco Nexus 3000 switches
Answer: B,C
NEW QUESTION 17
A client has a FlexPod Datacenter solution with four active fabric links in port channel mode established between the Cisco Fabric Interconnects and the IOMs on a Cisco 5108 blade chassis. The blade chassis is fully populated with Cisco UCS B200M5 blades. A worker in the data center inadvertently unplugs the fourth uplink cable from IOM-A while working in the rack.
In this scenario, what happens to the network traffic?
- A. Connectivity for servers 3, 4, 7, and 8 all fail over to IOM-B.
- B. There is a loss of connectivity for servers 4 and 8.
- C. Traffic is load-balanced within IOM-B.
- D. Traffic is load-balanced within IOM-A.
Answer: A
NEW QUESTION 18
An architect is designing a FlexPod environment with Cisco Nexus 5000 switches to SAN boot all of the ESXi hosts over FC.
In this scenario, what should the LUN ID number be?
- A. LUN 3
- B. LUN 1
Section: (none)
Explanation - C. LUN 0
- D. LUN 2
Answer: C
NEW QUESTION 19
Which command would a FlexPod administrator use to determine whether an FC initiator has logged on to the fabric?
- A. MDS9148>show fcc
- B. MDS9148>show fcfwd
- C. MDS9148>show flogi database
- D. MDS9148>show fcdomain
Answer: C
NEW QUESTION 20
A customer is designing a FlexPod Datacenter with Cisco UCS C-Series servers. They intend to manage the solution with Cisco UCS Manager. They want to cable the servers to the Cisco UCS Fabric Interconnects.
In this scenario, which three configurations are supported? (Choose three.)
- A. Cluster mode
- B. Multipath mode
- C. DualWire Management mode
- D. Direct Connect mode
- E. SingleConnect mode
Answer: C,D,E
Explanation:
Dual-wire Management (Shared LOM): Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco VIC card connects one cable that can carry both data traffic and management traffic. This feature is referred to as SingleConnect.
Direct Connect Mode: Cisco UCS Manager supports an option to connect the Cisco UCS C-Series Rack- Mount Server directly to the FIs. This option enables Cisco UCS Manager to manage the Cisco UCS C- Series Rack-Mount Servers using a single cable for both management traffic and data traffic. The Cisco UCS VIC connects to the FI of the system. This connection uses a single connection from each VIC to each FI.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm4-0/b_C-Series- Integration_UCSM4-0/b_C-Series-Integration_UCSM4-0_chapter_01.html
NEW QUESTION 21
You are asked to design a FlexPod solution that meets the minimum requirements and includes Application Centric Infrastructure (ACI).
Which three Cisco components are required in this scenario? (Choose three.)
- A. Cisco Nexus 2000 Series Fabric Extender
- B. Cisco Nexus 3000 Series switches
- C. Cisco UCS Series Fabric Interconnects
- D. Cisco UCS B-Series servers
- E. Cisco Nexus 9000 Series switches
Answer: C,D,E
NEW QUESTION 22
A FlexPod solution has been configured for iSCSI SAN boot with multiple paths between the server and the storage.
In this scenario, how many initiators (IQNs) per server will need to be added in the corresponding igroup in ONTAP?
- A. three
- B. four
- C. one
- D. two
Answer: B
Explanation:
The initator group REST API allows you to create, update, delete, and discover initiator groups, and add and remove initiators that can access the target and associated LUNs.
NEW QUESTION 23
Two data centers are 75km apart. The customer wants to deploy a FlexPod solution in each data center to maintain high availability between the two sites with minimal possible data loss.
In this scenario, which technology would you use at the NetApp storage layer?
- A. FlexArray
- B. SnapVault
- C. SnapMirror
- D. MetroCluster
Answer: D
NEW QUESTION 24
A customer with a FlexPod Datacenter design that uses a 4-node FAS8200 for storage wants to add a new workload that requires high performance. The customer needs to nondisruptively move some workloads from the existing FAS system to the new storage.
Which storage system would satisfy the requirements?
- A. E2700
- B. EF570
- C. FAS2700
- D. AFF A300
Answer: B
NEW QUESTION 25
A customer has a FlexPod Express configuration with a FAS2720 system. The company has opened a new remote location and will purchase a FlexPod Express configuration with a FAS2750 system. The business requires that the data be replicated to the new location.
Which two software applications accomplish this task? (Choose two.)
- A. SnapMirror
- B. SnapRestore
- C. SnapVault
- D. FlexCache
Answer: A,D
Explanation:
FlexClone®: Instant virtual copies with file and volume granularity
SnapMirror®: Integrated data replication technology for simple, efficient, flexible disaster recovery and backup use cases
NEW QUESTION 26
An administrator decides to connect storage directly to UCS Fabric Interconnect to support FCoE within a FlexPod configuration.
In this scenario, which port type should be defined on the Fabric Interconnect ports that are connected to the storage controller?
- A. uplink port
- B. server port
- C. appliance port
- D. monitor port
Answer: A
NEW QUESTION 27
A customer with a FlexPod Express solution wants to enable remote access to the NetApp storage component.
In this scenario, which two access methods are recommended? (Choose two.)
- A. SAML
- B. RDP
- C. SSH
- D. Telnet
Answer: C,D
NEW QUESTION 28
Which port type would you configure when you connect a chassis to the Cisco Fabric Interconnects?
- A. server ports
- B. FC storage ports
- C. appliance ports
- D. Ethernet uplink ports
Answer: B
NEW QUESTION 29
You are a data center architect at a service provider. You need to configure a new multi-tenant FlexPod service offering.
Which three UCS Manager features will you need to accomplish this task? (Choose three.)
- A. policies
- B. virtualization support
- C. service profiles
- D. auto discovery
- E. role-based access control
Answer: A,C,E
NEW QUESTION 30
A customer wants to extend a Layer 2 network over a Layer 3 Nexus 9000 infrastructure.
Which Layer 2 overlay scheme accomplishes this task?
- A. EIGRP
- B. vPC
- C. VXLAN
- D. STP
Answer: C
Explanation:
XLAN tunnels the Layer 2 network over the Layer.
NEW QUESTION 31
A customer wants to deploy FlexPod for a VDI solution with 10,000 users, each with 10 GB of storage allocated.
To support this configuration, which three components must be sized? (Choose three.)
- A. the Cisco UCS servers
- B. the 1GbE ports from user systems
- C. the optical cable length
- D. the NetApp AFF storage
- E. the fabric interconnect ports
Answer: A,B,E
NEW QUESTION 32
A customer wants to deploy a FlexPod solution that involves directly connecting the NetApp AFF storage using the FCoE protocol to the Cisco UCS Fabric Interconnects.
In this scenario, which Cisco UCS Fibre Channel mode would be used to accomplish this task?
- A. access mode
- B. end host mode
- C. trunk mode
- D. switching mode
Answer: D
NEW QUESTION 33
Which two NetApp storage controllers would be used in a valid FlexPod Datacenter configuration? (Choose two.)
- A. NetApp EF570
- B. NetApp FAS2700
- C. NetApp AFF A700
- D. NetApp E2800
Answer: B,C
NEW QUESTION 34
Your customer has a FlexPod solution with a 2-node switchless ONTAP system, Cisco Nexus 93108 switches, and Cisco UCS B-Series servers. The customer wants to expand to a 4-node ONTAP storage cluster.
Which configuration is valid for expansion?
- A. Use the existing Nexus 93108 switches for the cluster interconnect.
- B. Add two Nexus 3232C switches for the cluster interconnect.
- C. Add two Nexus 93108 switches for the cluster interconnect.
- D. Add one Nexus 3232C switch for the cluster interconnect.
Answer: B
NEW QUESTION 35
A customer is investigating options for implementing a FlexPod Datacenter solution that is using vSphere 6.x.
In this scenario, which two resources would be important to review? (Choose two.)
- A. VMware vSAN documentation
- B. Cisco Validated Design documents
- C. NetApp Technical Report
- D. Cisco Cloud Center documentation
Answer: B,C
NEW QUESTION 36
......
Verified NS0-173 dumps Q&As - 100% Pass from ActualPDF: https://braindumps2go.actualpdf.com/NS0-173-real-questions.html
