Free HPE6-A81 Braindumps Download Updated on Oct 07, 2022 with 60 Questions
HP HPE6-A81 Exam Practice Test Questions
NEW QUESTION 14
Refer to the exhibit.
A customer is trying to configure a TACACS Authentication Service for administrative what could be the reason for the Login Status REJECT?
- A. The Read-only Administrator role does not exist on the Controller.
- B. The Enforcement profile used is not a TACACS profile.
- C. The password used by the administrative user is wrong.
- D. The Enforcement profile is not designed to be used on Aruba Controller
Answer: A
NEW QUESTION 15
You have configured a Guest SSIO with Captive-portaI Web Authentication and MAC authentication. The MAC caching expiry time set to 12 hours and the Guest Account expiration time is set to 8 hours. What will happen if the guest were to disconnect from the SSID and re-connect 9 hours later?
- A. The client will successfully pass the mac authentication until the mac caching time expires.
- B. The client will fail the MAC authentication and be denied access to the Guest SSIO.
- C. The client will fail to get the MAC Caching role and will be redirected to the captive portal login page
- D. The client will successfully pass the MAC authentication but still be redirected to captive portal page.
Answer: D
NEW QUESTION 16
Which using Allow All MAC AUTH, which authentication source should be mapped to the service?
- A. Any Authentication source
- B. Guest Device Database
- C. Endpoint Database
- D. Static Host List
Answer: D
NEW QUESTION 17
You art deploying Cleat Pass Policy Manager with Guest functionality for a customer with multiple Aruba Networks Mobility Controllers. The customer wants to avoid SSL errors during guest access but due to company security policy cannot use a wildcard certificate on ClearPass or the Controllers.
What is the most efficient way to configure the customer's guest solution? (Select two.)
- A. Build one Web Login page with vendor settings for controller (company domain)
- B. Build multiple Web Login pages with vendor settings configured for each controller
- C. Install the same public certificate on all Controllers with the common name "controller.{company domain)
- D. Build one Web Login page with vendor settings for captiveportal-controller (company domain)
- E. Install multiple public certificates with a different Common Name on each controller
Answer: A,E
NEW QUESTION 18
Refer to the exhibit.
What enforcement prof lit will be assigned to the Windows 10 MDH enabled devices if it completes user authentication and is already profiled by ClearPess?
- A. Cisco Full Access VLAN
- B. Cisco Redirect URL - Service Unavailable
- C. Cisco Redirect ACL for profiling
- D. Default - Deny Access Profile
Answer: D
NEW QUESTION 19
Refer to the exhibit.
Your customer has configured the 802.1 X service enforcement conditions with the Endpoint profiling dat a. When the client connects to the network. ClearPass successfully profiles the client but the client always receives an incorrect enforcement profile The configurations in the Aruba controller are completed correctly What is the cause of the issue?
- A. The option, use cached roles and posture from previous sessions should be enabled.
- B. The enforcement policy conditions configured with profiling data are not correct
- C. The enforcement policy rules evaluation algorithm is not configured correctly.
- D. An additional authorization source should be configured for profiling to work.
Answer: A
NEW QUESTION 20
Refer to the exhibit.
A customer has configured Onboard in a cluster with two nodes. All devices were onboarded in the network through node1 but those clients fail to authenticate through node2 with the error shown What steps would you suggest to make provisioning and authentication work across the entire cluster? (Select three)
- A. Configure the Onboard Root CA to trust the Policy Manager EAP certificate root.
- B. Configure the Network Settings in Onboard to trust the Policy Manager EAP certificate.
- C. Make sure that the EAP certificates on both nodes are issued by one common root Certificate Authority (CA).
- D. Have all of the BYOO clients disconnect and reconnect to the network.
Answer: A,C,D
NEW QUESTION 21
Which statement is true about Radius IETF attributes Called-Stat ion-Id and Calling-Station-ld?
- A. Called-Station-ld contains the mac address of the authenticator while Calling-Station-ld contains the mac address of the supplicant and SSID name.
- B. Called-Station-Id contains the mac address of the supplicant and SSID name while Calling-Station-Id contains the mac address of the authenticator.
- C. Called-Station-ld contains the mac address of the authenticator while Calling-Station-Id contains the mac address of the supplicant.
- D. Called-Station-ld contains the mac address of the supplicant while Calling-Station-ld contains the mac address of the authenticator.
Answer: A
NEW QUESTION 22
A customer has multiple Aruba Controllers integrated with ClearPass for guest access using a controller-initialed login method. The customer is aware that a public CA-signed captive portal certificate is required in Aruba controllers for controller-initiated workflows. The customer has purchased unique public CA-signed server certificates for each controller.
What configuration steps would you suggest to the customer to complete the deployment? (Select three.)
- A. Add all the controller IP address and its certificate common names in the DNS server's Forward Lookup Zones and Reverse Lookup Zones to resolve queries from client.
- B. From the Aruba controller, enable the option "Add switch IP address in the redirection URL" under the respective L3 Authentication profile mapped in the initial role
- C. Edit the HTML header in the weblogin/ self-registration register page with a script to match the controllers IP and captive portal certificate CN names respectively.
- D. From the weblogin/ self-registration page NAS Vendor settings, enable the check box for "The controller will send the IP to submit credentials" under Dynamic address.
- E. From the Aruba controller, enable the option 'Add switch ip address in the redirection URL' under the respective guest AAA profile mapped in the VAP profile.
- F. From the weblogin/ self-registration page Login form settings, enable the check box for "The controller will send the IP to submit credentials" under Dynamic address.
Answer: D,E,F
NEW QUESTION 23
Refer to the exhibit.
The customer complains that the user shown cannot log into the ClearPess Server at an administrator using the [Policy Manager Admin Network Login Service]. What could be the reason for this?
- A. The mapping on the role should be changed to [RADIUS Super Admin]
- B. The account created does not fit this purpose.
- C. The user might be used for a TACACS authentication.
- D. The local user authentication might be disabled.
Answer: B
NEW QUESTION 24
A customer has acquired another company that has its own Active Directory infrastructure. The 802 1X PEAP authentication works with the customer's original Active Directory servers but the customer would like to authenticate users from the acquired company as well.
What steps are required, in regards to the Authentication Sources, in order to support this request? (Select two.)
- A. Add the new AD server(s) as backup into the existing Authentication Source.
- B. Create a new Authentication Source, type Active Directory.
- C. Create a new Authentication Source, type Generic LDAP.
- D. There is no need to join ClearPass to the new AD domain.
- E. Join the ClearPass server(s) to the new AD domain.
Answer: C,D
NEW QUESTION 25
Refer to the exhibit.
The users connecting to a wireless SSIO "secure-HS-5007" were being processed by an incorrect 802.1 X service created for VIP access and the user gets deny access. The customer has sent you the screenshot to get your support to resolve the issue What changes will you suggest to fix it?
- A. In the HS_Building 802.1X service, remove the service rule condition with Aruba controller location name and leave it in same position
- B. To the HS_Building 802.1 X service, add another service rule condition with VIP access Aruba-Essid-Name and leave it in same position
- C. In the HSBuilding 802. IXservice. change the Authentication method for AMCAuth for VIP access and leave it in same position
- D. Delete the HSBuilding 802 IX service, odd VIP access Aruba-Essid-Name as fourth condition to WSBuilding Aruba 802 1X service
Answer: A
NEW QUESTION 26
Which statements art true about Aruba down loadable user roles? (select three)
- A. Can use these result for other authentication methods not involving ClearPass.
- B. Aruba downloadable user role are universally available across the environment.
- C. Aruba downloadable user role is a built in enforcement template in ClearPass.
- D. Can be applied only on ports or WLAN users authenticated by ClearPass.
- E. Downloadable role names must be defined in Aruba switch or controller.
- F. Administering downloadable user roles can be difficult for a large enterprise.
Answer: A,D,E
NEW QUESTION 27
A customer has a Clear Pass cluster deployment with four servers, two servers at the data center and two servers at a large remote site connected over an SO-WAN solution. The customer would like to implement OnGuard. Guest Self-Registration, and 802.1 X authentication across their entire environment. During testing the customer is complaining that users connecting to an Instant Cluster Employee S5ID at the remote site, with the OnGuard Persistent Agent installed are randomly getting their health check missed.
What could be a possible cause of this behavior?
- A. The ClearPass Policy Manager zones have been defined but the local IP subnets have not but properly mapped to the zones and the OnGuard Agent might connect to any of the servers in the cluster.
- B. The OnGuard Clients are automatically mapped to the Policy Manager Zone based on their IP range but an ACL on the switch could be blocking access.
- C. The Aruba-user-role received by the IAP is filtering the TCP port 6658 to the Clear Pass servers and after 10 seconds the SSL fallback gets activated and randomly generates the issue
- D. The traffic on the TCP port 6658 is congested due to the fact that this port is also used by the IPSec keep-alive packets of the SO-WAN solution.
Answer: D
NEW QUESTION 28
You have designed a ClearPass solution for an Information Technology Business Park with 50,377 concurrent sessions including the visitors. The deployment includes eight ClearPass servers handling RADIUS authentication. Guest Self-Registration. Onboard and OnGuard. CPPM1 is acting as Publisher. CPPM2 to CPPM8 are added as subscriber nodes CPPM4 is the designated Standby Publisher. Servers CPPM2 and CPPM3 will be handling the Guest and Onboard HTTPS traffic. On a few devices, Corporate users will perform username and password based authentication with Active Directory accounts and on few devices, they will be using private CA signed TLS certificates to do the authentication The customer has three Active Directories (AD1, AD2 and A03) part of Multi-Domain Forest. To provide authentication redundancy, the customer has configured multiple Virtual IP settings between ClearPass servers in a cluster.
On all the Network Access Devices (NAD), the primary authentication server is configured as the VIP IP address and the secondary authentication server rs configured as CPPM1 MGMT IP address Based on the information provided, which ClearPass nodes will you join to the AD domain
- A. Join all the eight ClearPass servers to AD1, AD2 and AD3 domains.
- B. Join CPPM2 to CPPM7 ClearPass servers to the AD root domain.
- C. Join CPPM1. CPPM4 to CPPM8 to the AD1. AD2 and AD3 domains.
- D. Join CPPM1. CPPM4 to CPPM7 servers to the AD root domain
Answer: C
NEW QUESTION 29
A customer has created a Guest Self-Registration page that they would like to use it as 'template' for all the new pages that are going to be created from now on. Their goal is to ensure that the header and footer on every page are the same, and any edits made to them are automatically reflected on every Self-Registration Page.
What should be configured in order to accomplish this request?
- A. Create child pages when creating new Self-Registration pages and select the "template" as Parent.
- B. Save the "template" page as Master Self'Registration page.
- C. Save this "template" page as a new Skin to be used on other Self-Registration pages.
- D. Copy the "template" page and edit it each time a new Self-Registration Page is needed.
Answer: B
NEW QUESTION 30
A customer is troubleshooting a user that has complained about randomly having issues connecting the network with EAP PEAP using the Corporate Laptop. The initial checks are showing a number of authentication failures but no sign of issues with the ClearPass server or AD.
What can the Customer do to monitor this user Authentication trend closely over the next few days?
- A. configure an Alert using Failed Authentication template with Threshold 1. Interval 5 mins
- B. configure a Report using Radius Failed Authentication template and schedule it to run every 5 mins
- C. add the user name in the Insight/Alert/Watchlitst and get the authentication failures notifications within 30 seconds
- D. add to ClearPass Insight Dashboard the Authentication Status widget for this specific user
Answer: C
NEW QUESTION 31
Refer to the exhibit.
You have integrated the Cisco switch with ClearPass to do MAC-Auth for Cisco IP Phones. The phones connect to the network successfully but when you try to change the status of the device from the access tracker, you see only the ArubaOS Radius terminate session options and not the Cisco vendor terminate session options. What will you check to fix this issue?
- A. Verify if the Cisco IP Phone is actively connected to the switch to get the Cisco CoA options from ClearPass.
- B. Verify if the Enable RADIUS Dynamic Authorization option is checked for the Cisco switch added under the network devices.
- C. Verify if the ClearPass supports RADIUS Dynamic Authorization for the Cisco IP Phones doing MAC.AUTH.
- D. Verify that Cisco is chosen as the vendor name while adding the Cisco Switch under network devices.
Answer: D
NEW QUESTION 32
The customer would like to add a default common self-registration sponsor email under the initial value on all the ten self-registration pages created for different locations except for the guest registration page created for Sunnyvale location to use a different sponsor email in initial value. Under self-registration form fields, you have "Edit" and "Edit Base Field" Which edit options will you choose to make minimal configuration changes to implement the customer's requirement? (Select two)
- A. Update the sponsor email by clicking on both "Edit" and "Edit Base Field" options of the sponsor_email filed on the Sunnyvale register page
- B. Update the common sponsor email by clicking the "Edit" option of the sponsor email form field on the one of the self-registration register form page
- C. Update the specific sponsor email by clicking on "Edit Base Field" option of the sponsor_email form filed on the Sunnyvale location register form page
- D. Update the common sponsor email by clicking the "Edit Base Field" option of the sponsor_email form field on the one of the self-registration form page
- E. Update the specific sponsor email by clicking on the "Edit" option of the sponsor_email form filed on the Sunnyvale self-registration register form page
Answer: A,B
NEW QUESTION 33
Refer to the exhibit.
The customer configured a guest operator access by creating a custom operator profile and the built-in universal ClearPass profile mapping translation rule. When he tests the setup, he gets authentication failed. Using the streenshots sent by the customer as a reference, what would suggest to the customer to fix the issue?
- A. To map the operator profile name HS_Receptionist in the translation rule value field
- B. To re-enter the correct username and password for the Active Directory user Mike07.
- C. To correct the case sensitive attribute name in the enforcement profile to admin_privileges
- D. To verify if the username Mike07 has the Active Directory Title attribute set as Reception.
Answer: A
NEW QUESTION 34
A customer would like to allow only the AD users with the "Manager" title from the "HO" location to Onboard their personal devices. Any other AD users should not be authorized to pass beyond the initial device provisioning page. Which Onboard service will you use to implement this requirement?
- A. Onboard Pre-Auth service
- B. Onboard Authorization service
- C. Onboard Provisioning service
- D. Onboard CP login service
Answer: D
NEW QUESTION 35
Refer to the exhibit.
A customer it troubleshooting a client not getting the SHV posture updated and the OnGuard agent shows the Health Status Not Known. What could the user do to update the health status?
- A. connect using an interface that is configured as Managed Interface
- B. modify the agent.conf file and add the WIRED interface to it
- C. change the Policy Manager Zone mapping and add the WIRED interface range
- D. reinstall the OnGuard agent from the Wired interface
Answer: B
NEW QUESTION 36
A Customer has these requirements:
* 2.000 loT endpoints that use MAC authentication
* 6.000 endpoints using a mix of username/password and certificate (Corporate/BYOD) based authentication
* 1.000 guest endpoints at peak usage that use guest self-registration
* 1500 BYOD devices estimated as 3 devices per User (500 users)
* 2.500 endpoints that have OnGuard installed and connect on a daily basis What licenses should be installed to meet customer requirements?
- A. 9.000 Access. 500 Onboard. 2.500 OnGuard
- B. 13.000 Access. 1.500 Onboard. 2.500 OnGuard
- C. 11.500 Access. 500 Onboard. 2.500 OnGuard
- D. 11.500 Access. 1.500 Onboard. 2.500 OnGuard
Answer: D
NEW QUESTION 37
......
HP HPE6-A81 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
Updated Verified HPE6-A81 dumps Q&As - Pass Guarantee or Full Refund: https://braindumps2go.actualpdf.com/HPE6-A81-real-questions.html
