Get Nov-2024 Download Latest & Valid Questions For NACE NACE-CIP1-001 exam
Ensure Success With Updated Verified NACE-CIP1-001 Exam Dumps
NEW QUESTION # 21
NACE Level 1 Inspectors have been trained to perform:
- A. Visual inspection and Non-destructive testing
- B. Visual inspection, Non-Destructive and Destructive testing
- C. Visual inspection only
- D. All types of inspection
Answer: A
NEW QUESTION # 22
Passivation can best be described as:
- A. Treating metal with a liquid inhibiter
- B. A protective metallic oxide surface layer that slows corrosion
- C. A coating layer applied to the surface to inhibit corrosion
- D. Complete elimination pf the corrosion process
Answer: B
NEW QUESTION # 23
A successful coating inspector must be able to
- A. recommend the appropriate coating technique for the job to the contractor.
- B. look for problems or issues during application.
- C. apply the coating with expert accuracy.
- D. advise the coating applicator on how to mix the coating.
Answer: B
NEW QUESTION # 24
Check abrasive blast pressure with a
- A. nozzle aperature gauge
- B. surface comparator
- C. replica tape
- D. needle pressure gauge
Answer: D
NEW QUESTION # 25
The initial steel condition is important to the NACE Inspector because:
- A. If the steel is pitted more coating will be required
- B. It affects the final appearance after blasting
- C. The Inspector may have to reject the Steel
- D. Less abrasive is need if the mill Scale s gone
Answer: C
NEW QUESTION # 26
Good records can provide maintenance departments with detailed information about ALL of the following EXCEPT
- A. what materials were used.
- B. what items were coated.
- C. when the coating will be reapplied.
- D. how the item was coated.
Answer: D
NEW QUESTION # 27
Owners hire NACE Inspectors' with the expectation that:
- A. The inspection cost will be offset by an improvement in service life
- B. a) and c)
- C. The Inspector will make a meaningful technical contribution to the job
- D. The Inspector will improve job flow and schedule
Answer: B
NEW QUESTION # 28
A NACE Coating Inspector is permitted to transport coating material when:
- A. Asked to do so by the Owner's Representative
- B. The Inspector should never transport coating material
- C. Asked to do so by the Coating Application team
- D. If the Inspector meets all the necessary requirements for Transportation of Dangerous Goods
Answer: B
NEW QUESTION # 29
An exposed area of the substrate or previous coat of a conductive coating material, often caused by poor application technique is called
- A. sagging.
- B. checking.
- C. cracking.
- D. holiday.
Answer: D
NEW QUESTION # 30
If a Thermoset coating is heated it will:
- A. Harden and retain its hardness when cooled
- B. Soften when heated and retain its softness when cooled
- C. Harden and return to its original hardness when cooled
- D. Soften when heated and return to its original hardness when cooled
Answer: A
NEW QUESTION # 31
You are the NACE Inspector on a job where ISO ST 3 has been specified. The Contractor normally works to SSPC standards and been referencing SSPC SP 3.
Could this have any impact on the final surface preparation appearance?
- A. It depends on which hand tool the Contractor selects
- B. Yes, because the 'two standards are not equivalent
- C. It depends on which power tool the Contractor selects
- D. No, because there is no real difference in the standards
Answer: D
NEW QUESTION # 32
Common errors that can produce inaccurate readings when using Wet Film Thickness (WFT) gauges include:
Select All That Apply
- A. Placing the gauge along the longitudinal axis
- B. Dragging a gauge through wet coating
- C. Using a damaged gauge
Answer: B,C
NEW QUESTION # 33
You are the NACE Inspector on a job where the Owner's specification requites you to perform a twice daily check of blast pressure at the nozzle. It is now day 30 on the job and all of your readings have been within compliance. The Contractor complains that these checks taking up much time and in view of the compliant results they are unnecessary.
Your FIRST preferred course of action is to:
- A. Keep doing the checks regardless
- B. Skip the checks as you are. confident the blast pressure is OK
- C. Skip the checks and just record the same readings as you have been getting
- D. Keep doing the checks and consult the Owner's representative for direction
Answer: D
NEW QUESTION # 34
An inspectors personal log book should contain:
- A. No comments regarding the application team
- B. Subjective comments re ding the application team
- C. The inspector's personal opinions of the application team
- D. Objective comments regarding the application work
Answer: A
NEW QUESTION # 35
What is the minimum spot measurement value allowed by SSPC-PA 2 in each 10 m2 (100 ft2) area?
- A. 70% of the specified maximum thickness
- B. 80% of the specified minimum thickness
- C. 90% of the specified maximum thickness
- D. 100% of the specified maximum thickness
Answer: B
NEW QUESTION # 36
Prior to using Inspection Tools the inspector must:
- A. Ensure the instrument is within calibration parameters
- B. a), b) & c)
- C. Read the manufactures' instructions
- D. Be trained on how to use the instrument
Answer: B
NEW QUESTION # 37
How many gauge readings does SSPC-PA 2 require within a 4 cm (1.5 inch) diameter circle?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 38
......
Exam Materials for You to Prepare & Pass NACE-CIP1-001 Exam: https://braindumps2go.actualpdf.com/NACE-CIP1-001-real-questions.html
