Get Ready to Pass the 1z0-1033-22 exam with Oracle Latest Practice Exam
Get Prepared for Your 1z0-1033-22 Exam With Actual Oracle Study Guide!
NEW QUESTION 52
Identify two options to which transactions can be forwarded using forwarding rules. (Choose two.)
- A. users
- B. any of the users who are part of the Approval group
- C. any email address registered in the CPQ Cloud system
- D. user groups
Answer: A,D
Explanation:
References:
NEW QUESTION 53
You want to add multiple sections to your Document Designer template, and you want the sections flow in the template without page breaks between each section.
How would you accomplish this?
- A. You do not have to do anything because this is the default behavior in Document Designer.
- B. Select the Continuous Section check box in the Section Properties panel for each subsequent section following the first section in the series.
- C. Add each section to the template and manually remove the page breaks at the end of each section.
- D. Select the Child Section check box in the Section Properties panel for each subsequent section following the first section in the series.
- E. Add the first section in the series and select the Continuous Section check box in the Section Properties panel.
Answer: B
Explanation:
References:
NEW QUESTION 54
Which Configuration Flow would you choose to design a Configurator where attributes vary based on prior user selections and have a sequential relationship consisting of distinct steps?
- A. Master Start and End Flow
- B. any Configuration Flow with a combination of Constraint and Hiding rules that meet requirements
- C. Multi Node Configuration Flow
- D. Search Flow
Answer: C
NEW QUESTION 55
The user would like to run the "SFDC Quote Upsert" on a commerce action. Where would the user define this within CPQ?
- A. The user will define the relation in the Integration Center under the Integration Platfrom within the Admin Homepage.
- B. The user will define the action to run in the SOAP Generator XSL.
- C. The user will select the "SFDC Quote Upsert" from the Integration list in the Integration tab on the commerce action.
- D. The user will select the "SFDC Quote Upsert" from the Modify tab in the commerce action.
Answer: C
NEW QUESTION 56
What is the order of execution when a new transaction is created?
- A. advanced main doc default BML, attribute defaults, main doc integration
- B. attribute defaults, advanced main doc default BML, process integration
- C. main doc integration, advanced main doc default BML, attribute defaults
- D. process integration, attribute defaults, advanced main doc default BML, main doc integration
- E. process integration, attribute defaults, advanced main doc default BML
- F. process integration, advanced main doc default BML, attribute defaults
Answer: B
NEW QUESTION 57
How should an administrator set up a conditional restriction for access to a Product Family?
- A. by setting up a restricted profile and user group in Commerce and hiding the add, reconfigure, and delete product options
- B. by writing a Constraint rule at the Product Family level
- C. by hiding the model Punch-In on the home page by using JavaScript
- D. by providing conditional access criteria in the Restricted Access section of the home page setup
Answer: D
NEW QUESTION 58
Identify three types of activities that are captured in Administration logs. (Choose three.)
- A. modification of Commerce process objects
- B. migrations with the site as target
- C. creation of configuration objects
- D. uploading of files in File Manager
- E. deployment of configuration product families
- F. creation of data tables
Answer: A,B,E
NEW QUESTION 59
Which three discount types are available in pricing? (Choose three.)
- A. amount discount
- B. quantity-dependent discount
- C. percent discount
- D. absolute price
- E. promotion discount
Answer: A,B,C
NEW QUESTION 60
Which statement is a proper definition of a Punch-In?
- A. Punch-Ins are links that hook into specific product families in the system. They can be used to navigate directly from a product family to another in your application. They can also be used to jump into a specific product family from an external website.
- B. Punch-Ins are links that relate into specific parts in the system. They can be used to search directly for a given part in your application. They can also be used to search for a specific part from an external website.
- C. Punch-Ins are links that hook into specific pages in the system. They can be used to navigate directly from one page to another in your application. They can also be used to jump to a specific page from an external website.
- D. Punch-Ins are links that hook into a specific Commerce process in the system. They can be used to navigate directly to a given Commerce process in your application. They can also be used to jump into a specific Commerce process from an external website.
- E. Punch-Ins are buttons that take you to specific pages in the system. They can be used to navigate directly from one page to another in your application.
Answer: C
Explanation:
References:
NEW QUESTION 61
What would you do if a partner organization is no longer needed and the access of all users needs to be removed?
- A. Open the list of partner organizations and set the value of Maximum Users to "0".
- B. Proxy log in as superuser, go to the list of partner organizations, and select Denied in the Access drop-down list.
- C. Go to the list of partner organizations, perform a proxy log in as the superuser of the partner organization, go to the list of users, select all active users, and click Inactivate.
- D. Proxy log in as superuser, go to the list of partner organizations, and select the partner organization and delete it.
Answer: C
NEW QUESTION 62
Select two statements that are true about Test Script found in a function debugger. (Choose two.)
- A. Test Script can be used to compute multiple iterations of the library functions and print each.
- B. Test Script describes the various functions used in BML.
- C. Test Script provides a way to test a BML Library function when array type attributes are input parameters.
- D. Test Script is template of how the BML function should be written.
Answer: B,C
NEW QUESTION 63
A customer has BOM Mapping configured on their site using a simple Table-Based BOM Mapping rule. However, they want to modify their BOM Mapping to also map an additional Configuration attribute to a Transaction Line level attribute.
Which two methods can the customer use to achieve this? (Choose two.)
- A. Add a new entry in the BOM Attribute Mapping table for the BOM item.
- B. Define an Advanced BML-Based BOM Mapping rule that populates the "definition" node of the BOM item.
- C. Add a new entry in the BOM Attribute Definition table for the BOM item.
- D. Add a new entry in the BOM Item Mapping Definition table for the BOM item.
- E. Define an Advanced BML-Based BOM Mapping rule that populates the "fields" node of the BOM item.
- F. Define an Advanced BML-Based BOM Mapping rule that populates the "attributes" node of the BOM item.
Answer: A,F
Explanation:
References:
NEW QUESTION 64
What is the correct procedure for moving a file from one folder to another in File Manager?
- A. Click File Manager on the Admin home page, click the source file folder, select the check box next to the file you want to move, select the destination folder from the Select Folder drop-down menu, and click the Move button.
- B. Click File Manager on the Admin home page, click the source file folder, click the file you want to move, and drag the file to the destination folder.
- C. Click File Manager on the Admin home page, click the source file folder, right-click the file you want to move and select Copy from the shortcut menu, click the destination file folder, and right-click in the list of files in that destination folder and select Paste from the shortcut menu.
- D. Click File Manager on the Admin home page, click the source file folder, select the check box next to the file you want to move, click the destination folder, and click the Move button.
- E. Click File Manager on the Admin home page, click the source file folder, select the check box next to the file you want to move, select the destination folder from the Select Folder drop-down menu, and click the Copy button.
Answer: B
NEW QUESTION 65
You are asked to design a Document Designer template, which should generate an output document where users would be able to navigate to a specific section from the table of contents. This is a complex document with many sections and subsections that can go up to seven levels of parent/child relationships.
Which three steps do you need to perform to ensure that the table of contents show only two levels of the sections and subsections so that the user reviewing the document can navigate to a desired section's page and scroll further to the deeper levels? (Choose three.)
- A. Create headings by using the Heading element for the section content in your template.
- B. Assign page numbers to all heading elements.
- C. Enable the Table of Contents option for all heading styles.
- D. Assign a heading style set to the Table of Contents layout.
- E. Enable the Table of Contents option for selected heading styles.
Answer: A,B,C
NEW QUESTION 66
For a multi-language Document Designer template, which of the following two activities are possible for the nondefault language view? (Choose two.)
- A. Change text content.
- B. Modify date and currency formats.
- C. Add or remove table element's rows and columns.
- D. Move text elements between elements and layouts.
- E. Add new image element in a section.
Answer: B,E
NEW QUESTION 67
The Related Parts data table exists in the QA environment and in the production environment. The table has 3,000 records in the QA environment and 4,000 records in the production environment.
How many records will be present in the data table in the production environment if this table is migrated from the QA environment?
- A. 3,000
- B. 7,000
- C. 4,000
- D. 1,000
Answer: C
NEW QUESTION 68
How do you modify a specific user's access (grant access or remove access) to Product Families, Supported Product Families, and Data Table folders?
- A. Go to the Product Family definition or the Data Table folder properties for which you want to grant or remove access, click the Access Permissions tab, select or deselect the check boxes related to the users you want to grant access to or remove access from for this Product Family or Data Table folder.
- B. Click the user's name on the User Administration List page to edit the user, click the Access Permission tab, select or deselect the check boxes related to the items you want to grant access to or remove access from for this user.
- C. Use the Navigation Menus item on the Administration home page to grant or remove access to specific Product Families or Data Table folders for the user.
- D. Click the Group name on the Group Administration List page that has this user as a member, click the Access Permissions tab, select or deselect the check boxes related to the items you want to grant access to or remove access from for this user.
- E. For each Product Family or Data table folder affected, click the Modify tab for that item and then select or deselect the check boxes related to the users you want to grant access to or remove access from for this Product Family or Data Table folder.
Answer: D
NEW QUESTION 69
......
Pass Your Next 1z0-1033-22 Certification Exam Easily & Hassle Free: https://braindumps2go.actualpdf.com/1z0-1033-22-real-questions.html
