IBM C1000-026 Real Exam Questions Guaranteed Updated Dump from ActualPDF
Verified Pass C1000-026 Exam in First Attempt Guaranteed
How much IBM Certified Associate Administrator - IBM QRadar Cost
The cost of the IBM Certified Associate Administrator - IBM QRadar is $150. For more information related to exam price, please visit the official website as the cost of exams may be subjected to vary county-wise.
NEW QUESTION 11
To comply with specific regulations, an administrator has been requested to increase asset retention to 365 days.
In which QRadar section can the administrator find the asset retention settings?
- A. Assets Tab / Retention settings
- B. Assets Tab / Asset Retention
- C. Admin Tab / Asset Retention
- D. Admin Tab / System settings
Answer: D
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.2/com.ibm.qradar.doc/t_qradar_adm_asset_tuning_ip_retention.html
NEW QUESTION 12
An administrator enabled the base license of QRadar Vulnerability Manager.
How many assets can be scanned using this license?
- A. up to 100
- B. up to 128
- C. up to 512
- D. up to 256
Answer: C
Explanation:
Reference:
c_qvm_deploy.html
NEW QUESTION 13
An administrator has added a new Event Processor to a QRadar deployment.
How many events per second (EPS) are granted from the temporary license and how many days will those EPS last?
- A. 10000 EPS for a 45 day period
- B. 10000 EPS for a 35 day period
- C. 5000 EPS for a 45 day period
- D. 5000 EPS for a 35 day period
Answer: D
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.0/com.ibm.qradar.doc/ c_qradar_adm_license_mgmt.html
NEW QUESTION 14
After fixing the assets that contributed to the asset growth deviation, an administrator needs to find the asset artifacts that have to be cleaned up.
What action should the administrator take to find the artifacts?
- A. Run the ./cleanAssets.sh --list command
- B. On the "Log Activity" tab, run the "Deviating Asset Growth: Asset Report event search"
- C. On the Admin Tab, select System Configuration --> Asset Profiler Configuration
- D. On the Asset tab, run the "Clean Assets" action
Answer: B
Explanation:
Explanation/Reference: https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.2/com.ibm.qradar.doc/ t_qradar_adm_assets_deleting_invalid_assets.html
NEW QUESTION 15
A QRadar user reported the following notification:
38750099 - The accumulator was unable to aggregate all events/flows for this interval When does this message appear?
- A. When the system is unable to accumulate data aggregations within 60 seconds
- B. When aggregated data views are disabled
- C. When search results is unable to return over 200 unique objects
- D. When the aggregate data view configuration that is in memory is unable to write data to the database
Answer: A
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/SSKMKU/com.ibm.qradar.doc/38750099.html
NEW QUESTION 16
An administrator is about to integrate logs from a custom firewall in a QRadar deployment using syslog. The SIEM has two domains, namely Domain A and Domain B.
While reviewing the following sample logs, the administrator notices a "context" keyword:
May 14 11:05:01 192.168.1.23 20190514 11:05:00 context=contextA permit 192.168.1.24 source:
10.10.1.15; source_port: 64094; destination: 10.10.13.34; service: 53; protocol: udp; May 13 12:07:01 192.168.1.23 20190513 11:07:00 context=contextB permit 192.168.1.25 source:
10.10.1.15; source_port: 64094; destination: 10.10.13.34; service: 53; protocol: udp; Which options assign the "contextA" logs to DomainA and the "contextB" logs to domain B? (Choose two.)
- A. Create two individual log sources by configuring a separated logging instance for each context on the firewall and assign each log source to the correct domain.
- B. Create a single log source, create a "Context" custom event property, and assign the log to both domains using a custom rule.
- C. Create a single log source, create a "Context" custom event property, and assign the log to the correct domain using custom event property value.
- D. Create a single log source, create a "Context" custom event property, and assign the log to the correct domain using a custom rule.
- E. Create two individual log sources using the context value as log source identifier and assign each log source to the correct domain.
Answer: A,E
NEW QUESTION 17
An administrator needs data backup.
What information is contained in the data backup?
- A. Audit log information, Event data, Indexes, Index management information, Flow data, Report data
- B. Audit log information, Event data, Indexes, Index management information, Flow data, Report data, Groups
- C. Audit log information, Event data, Flow data, Report data, Indexes
- D. Audit log information, Event data, Flow data, Report data, Indexes, Log sources
Answer: C
Explanation:
Reference:
c_qradar_adm_man_back_recovery.html
NEW QUESTION 18
A QRadar administrator added High Availability (HA) to the Event Processor and needs to verify the crossover link status between the primary and secondary hosts.
Which commands can be used to verify the crossover status? (Choose two.)
- A. /opt/qradar/ha/bin/getStatus crossover
- B. /opt/qradar/ha/bin/ha_getstate.sh
- C. /opt/qradar/ha/bin/ha cstate
- D. cat /proc/drbd
- E. /opt/qradar/ha/bin/qradar_nettune.pl linkaggr <interface> status
- F. /opt/qradar/ha/bin/qradar_nettune.pl crossover status
Answer: C,F
Explanation:
Explanation/Reference: https://www.ibm.com/support/pages/qradar-verifying-ha-crossover-connections-qradarnettunepl
NEW QUESTION 19
An administrator needs data backup.
What information is contained in the data backup?
- A. Audit log information, Event data, Indexes, Index management information, Flow data, Report data
- B. Audit log information, Event data, Indexes, Index management information, Flow data, Report data, Groups
- C. Audit log information, Event data, Flow data, Report data, Indexes
- D. Audit log information, Event data, Flow data, Report data, Indexes, Log sources
Answer: C
Explanation:
Explanation/Reference: https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.0/com.ibm.qradar.doc/ c_qradar_adm_man_back_recovery.html
NEW QUESTION 20
An administrator has been tasked to run all health checks at once using the DrQ command before a major event happens, such as an upgrade.
What does the DrQ command do?
- A. It runs all available checks in /opt/ibm/si/diagnostiq with the checkup mode and with the summary output mode.
- B. It shows all the available drives on the QRadar managed host.
- C. It runs all available checks in /opt/ibm/si/diagnostiq and writes the results in a txt file.
- D. It checks all the available drives on the QRadar managed host and writes the results on a txt file.
Answer: A
Explanation:
Explanation/Reference: https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.2/com.ibm.qradar.doc/ t_drq_running_health_checks.html
NEW QUESTION 21
An administrator is seeing the following system notification:
38750057 - A protocol source configuration may be stopping events from being collected.
What is a valid user action to this issue?
- A. Restart the QRadar Console
- B. Review the /var/log/error.log file for more information
- C. Review the /var/log/qradar.log file for more information
- D. Re-install the QRadar Console
Answer: B
Explanation:
Explanation/Reference: https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.0/ com.ibm.qradar.doc/38750057.html
NEW QUESTION 22
A QRadar user reported the following notification:
38750099 - The accumulator was unable to aggregate all events/flows for this interval When does this message appear?
- A. When the system is unable to accumulate data aggregations within 60 seconds
- B. When aggregated data views are disabled
- C. When search results is unable to return over 200 unique objects
- D. When the aggregate data view configuration that is in memory is unable to write data to the database
Answer: A
NEW QUESTION 23
An administrator has been tasked to run all health checks at once using the DrQ command before a major event happens, such as an upgrade.
What does the DrQ command do?
- A. It runs all available checks in /opt/ibm/si/diagnostiq with the checkup mode and with the summary output mode.
- B. It shows all the available drives on the QRadar managed host.
- C. It runs all available checks in /opt/ibm/si/diagnostiq and writes the results in a txt file.
- D. It checks all the available drives on the QRadar managed host and writes the results on a txt file.
Answer: A
Explanation:
Reference:
t_drq_running_health_checks.html
NEW QUESTION 24
An administrator logs in to the Offenses tab and finds a large number of new Offenses that need action.
What column in the list of Offenses should the administrator use to prioritize them?
- A. Offense Type
- B. Source IPs
- C. Last Event/Flow
- D. Magnitude
Answer: D
Explanation:
Reference:
b_qradar_users_guide.pdf (43)
NEW QUESTION 25
To comply with specific regulations, an administrator has been requested to increase asset retention to 365 days.
In which QRadar section can the administrator find the asset retention settings?
- A. Assets Tab / Retention settings
- B. Assets Tab / Asset Retention
- C. Admin Tab / Asset Retention
- D. Admin Tab / System settings
Answer: D
Explanation:
Reference:
t_qradar_adm_asset_tuning_ip_retention.html
NEW QUESTION 26
Which event routing rule is required to add QRadar Data Store (QDS) capability to a deployment?
- A. Log Only (exclude Analytics)
- B. Delete data When storage space is required
- C. Bypass Correlation
- D. Delete data immediately after the retention period has expired
Answer: A
Explanation:
Reference:
t_qradar_adm_data_store.html
NEW QUESTION 27
An administrator enters the QRadar web console into a web browser but does not get a response.
Which process is responsible for the QRadar GUI?
- A. consoled
- B. guid
- C. tomcat
- D. magistrated
Answer: C
NEW QUESTION 28
An administrator has been tasked to run all health checks at once using the DrQ command before a major event happens, such as an upgrade.
What does the DrQ command do?
- A. It runs all available checks in /opt/ibm/si/diagnostiq with the checkup mode and with the summary output mode.
- B. It shows all the available drives on the QRadar managed host.
- C. It runs all available checks in /opt/ibm/si/diagnostiq and writes the results in a txt file.
- D. It checks all the available drives on the QRadar managed host and writes the results on a txt file.
Answer: A
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.2/com.ibm.qradar.doc/ t_drq_running_health_checks.html
NEW QUESTION 29
......
How to book the IBM Certified Associate Administrator - IBM QRadar
To apply for the IBM Certified Associate Administrator - IBM QRadar, You have to follow these steps:
- Step 1: Go to the EC 312-38 Official Site
- Step 2: Read the instruction Carefully
- Step 3: Follow the given steps
- Step 4: Apply for the EC 312-38 Exam
Download Real IBM C1000-026 Exam Dumps Test Engine Exam Questions: https://braindumps2go.actualpdf.com/C1000-026-real-questions.html
