UPDATED [May 17, 2024] Pass Fortinet NSE 6 - FortiAuthenticator 6.4 Exam with Latest Questions
NSE6_FAC-6.4 Exam Practice Questions prepared by Fortinet Professionals
The Fortinet NSE6_FAC-6.4 exam comprises of 35 multiple choice questions, which a candidate must complete in 60 minutes. The passing criteria for the exam is a minimum score of 60%. NSE6_FAC-6.4 exam is available in English and is conducted at Fortinet certified training centers worldwide.
Fortinet NSE6_FAC-6.4 Certification Exam is an advanced-level certification exam that requires a deep understanding of Fortinet NSE 6 - FortiAuthenticator 6.4. NSE6_FAC-6.4 exam consists of 60 multiple-choice questions that must be answered within 90 minutes. The passing score for the exam is 70%, and the exam is available in English.
NEW QUESTION # 18
Which two statement about the RADIUS service on FortiAuthenticator are true? (Choose two)
- A. Only local users can be authenticated through RADIUS
- B. Two-factor authentication cannot be enforced when using RADIUS authentication
- C. RADIUS users can migrated to LDAP users
- D. FortiAuthenticator answers only to RADIUS client that are registered with FortiAuthenticator
Answer: C,D
Explanation:
Two statements about the RADIUS service on FortiAuthenticator are true:
RADIUS users can be migrated to LDAP users using the RADIUS learning mode feature. This feature allows FortiAuthenticator to learn user credentials from an existing RADIUS server and store them locally as LDAP users for future authentication requests.
FortiAuthenticator answers only to RADIUS clients that are registered with FortiAuthenticator. A RADIUS client is a device that sends RADIUS authentication or accounting requests to FortiAuthenticator. A RADIUS client must be added and configured on FortiAuthenticator before it can communicate with it.
NEW QUESTION # 19
Which of the following is an OATH-based standard to generate event-based, one-time password tokens?
- A. OLTP
- B. HOTP
- C. SOTP
- D. TOTP
Answer: B
Explanation:
Reference:
HOTP stands for HMAC-based One-time Password, which is an OATH-based standard to generate event-based OTP tokens. HOTP uses a cryptographic hash function called HMAC (Hash-based Message Authentication Code) to generate OTPs based on two pieces of information: a secret key and a counter. The counter is incremented by one after each OTP generation, creating an event-based sequence of OTPs.
NEW QUESTION # 20
When configuring syslog SSO, which three actions must you take, in addition to enabling the syslog SSO method? (Choose three.)
- A. Define a syslog source.
- B. Set the same password on both the FortiAuthenticator and the syslog server.
- C. Set the syslog UDP port on FortiAuthenticator.
- D. Select a syslog rule for message parsing.
- E. Enable syslog on the FortiAuthenticator interface.
Answer: A,C,D
Explanation:
To configure syslog SSO, three actions must be taken, in addition to enabling the syslog SSO method:
Define a syslog source, which is a device that sends syslog messages to FortiAuthenticator containing user logon or logoff information.
Select a syslog rule for message parsing, which is a predefined or custom rule that defines how to extract the user name, IP address, and logon or logoff action from the syslog message.
Set the syslog UDP port on FortiAuthenticator, which is the port number that FortiAuthenticator listens on for incoming syslog messages.
NEW QUESTION # 21
Which behaviors exist for certificate revocation lists (CRLs) on FortiAuthenticator? (Choose two)
- A. CRLs can be exported only through the SCEP server
- B. CRLs contain the serial number of the certificate that has been revoked
- C. All local CAs share the same CRLs
- D. Revoked certificates are automaticlly placed on the CRL
Answer: B,D
Explanation:
CRLs are lists of certificates that have been revoked by the issuing CA and should not be trusted by any entity. CRLs contain the serial number of the certificate that has been revoked, the date and time of revocation, and the reason for revocation. Revoked certificates are automatically placed on the CRL by the CA and the CRL is updated periodically. CRLs can be exported through various methods, such as HTTP, LDAP, or SCEP. Each local CA has its own CRL that is specific to its issued certificates. Reference: https://docs.fortinet.com/document/fortiauthenticator/6.4/administration-guide/372408/certificate-management/372413/certificate-revocation-lists
NEW QUESTION # 22
Which two features of FortiAuthenticator are used for EAP deployment? (Choose two)
- A. Certificate authority
- B. LDAP server
- C. RADIUS server
- D. MAC authentication bypass
Answer: A,C
Explanation:
Two features of FortiAuthenticator that are used for EAP deployment are certificate authority and RADIUS server. Certificate authority allows FortiAuthenticator to issue and manage digital certificates for EAP methods that require certificate-based authentication, such as EAP-TLS or PEAP-EAP-TLS. RADIUS server allows FortiAuthenticator to act as an authentication server for EAP methods that use RADIUS as a transport protocol, such as EAP-GTC or PEAP-MSCHAPV2.
NEW QUESTION # 23
You want to monitor FortiAuthenticator system information and receive FortiAuthenticator traps through SNMP.
Which two configurations must be performed after enabling SNMP access on the FortiAuthenticator interface? (Choose two)
- A. Associate an ASN, 1 mapping rule to the receiving host
- B. Set the tresholds to trigger SNMP traps
- C. Upload management information base (MIB) files to SNMP server
- D. Enable logging services
Answer: B,C
Explanation:
To monitor FortiAuthenticator system information and receive FortiAuthenticator traps through SNMP, two configurations must be performed after enabling SNMP access on the FortiAuthenticator interface:
Set the thresholds to trigger SNMP traps for various system events, such as CPU usage, disk usage, memory usage, or temperature.
Upload management information base (MIB) files to SNMP server to enable the server to interpret the SNMP traps sent by FortiAuthenticator.
NEW QUESTION # 24
You are an administrator for a large enterprise and you want to delegate the creation and management of guest users to a group of sponsors.
How would you associate the guest accounts with individual sponsors?
- A. As an administrator, you can assign guest groups to individual sponsors.
- B. Guest accounts are associated with the sponsor that creates the guest account.
- C. You can automatically add guest accounts to groups associated with specific sponsors.
- D. Select the sponsor on the guest portal, during registration.
Answer: B
Explanation:
Guest accounts are associated with the sponsor that creates the guest account. A sponsor is a user who has permission to create and manage guest accounts on behalf of other users3. A sponsor can create guest accounts using the sponsor portal or the REST API3. The sponsor's username is recorded as a field in the guest account's profile3.
NEW QUESTION # 25
Which statement about the assignment of permissions for sponsor and administrator accounts is true?
- A. Administrator capabilities are assigned by applying permission sets to admin groups.
- B. Both sponsor and administrator account permissions are assigned using admin profiles.
- C. Only administrator accounts permissions are assigned using admin profiles.
- D. Sponsor permissions are assigned using group settings.
Answer: B
Explanation:
Both sponsor and administrator account permissions are assigned using admin profiles. An admin profile is a set of permissions that defines what actions an administrator or a sponsor can perform on FortiAuthenticator. An admin profile can be assigned to an admin group or an individual admin user. A sponsor is a special type of admin user who can create and manage guest accounts on behalf of other users.
NEW QUESTION # 26
An administrator has an active directory (AD) server integrated with FortiAuthenticator. They want members of only specific AD groups to participate in FSSO with their corporate FortiGate firewalls.
How does the administrator accomplish this goal?
- A. Configure SSO groups and assign them to FortiGate groups.
- B. Configure fine-grained controls on FortiAuthenticator to designate AD groups.
- C. Configure a domain groupings list to identify the desired AD groups.
- D. Configure a FortiGate filter on FortiAuthenticatoc
Answer: A
Explanation:
To allow members of only specific AD groups to participate in FSSO with their corporate FortiGate firewalls, the administrator can configure SSO groups and assign them to FortiGate groups. SSO groups are groups of users or devices that are defined on FortiAuthenticator based on various criteria, such as user group membership, source IP address, MAC address, or device type. FortiGate groups are groups of users or devices that are defined on FortiGate based on various criteria, such as user group membership, firewall policy, or authentication method. By mapping SSO groups to FortiGate groups, the administrator can control which users or devices can access the network resources protected by FortiGate.
NEW QUESTION # 27
Which option correctly describes an SP-initiated SSO SAML packet flow for a host without a SAML assertion?
- A. Principal contacts idendity provider and authenticates, identity provider relays principal to service provider after valid authentication
- B. Principal contacts service provider, service provider redirects principal to idendity provider, after succesfull authentication identify provider redirects principal to service provider
- C. Principal contacts idendity provider and is redirected to service provider, principal establishes connection with service provider, service provider validates authentication with identify provider
- D. Service provider contacts idendity provider, idendity provider validates principal for service provider, service provider establishes communication with principal
Answer: B
Explanation:
SP-initiated SSO SAML packet flow for a host without a SAML assertion is as follows:
Principal contacts service provider, requesting access to a protected resource.
Service provider redirects principal to identity provider, sending a SAML authentication request.
Principal authenticates with identity provider using their credentials.
After successful authentication, identity provider redirects principal back to service provider, sending a SAML response with a SAML assertion containing the principal's attributes.
Service provider validates the SAML response and assertion, and grants access to the principal.
NEW QUESTION # 28
Which statement about captive portal policies is true, assuming a single policy has been defined?
- A. All conditions in the policy must match before a user is presented with the captive portal.
- B. Portal policies can be used only for BYODs.
- C. Conditions in the policy apply only to wireless users.
- D. Portal policies apply only to authentication requests coming from unknown RADIUS clients
Answer: A
Explanation:
Captive portal policies are used to define the conditions and settings for presenting a captive portal to users who need to authenticate before accessing the network. A captive portal policy consists of a set of conditions and a set of actions. The conditions can be based on various attributes, such as source IP address, MAC address, user group, device type, or RADIUS client. The actions can include redirecting the user to a specific portal, applying a specific authentication method, or assigning a specific VLAN or firewall policy. A single policy can have multiple conditions, and all conditions in the policy must match before a user is presented with the captive portal.
NEW QUESTION # 29
When generating a TOTP for two-factor authentication, what two pieces of information are used by the algorithm to generate the TOTP?
- A. Time and FortiAuthenticator serial number
- B. Time and mobile location
- C. Time and seed
- D. UUID and time
Answer: C
Explanation:
TOTP stands for Time-based One-time Password, which is a type of OTP that is generated based on two pieces of information: time and seed. The time is the current timestamp that is synchronized between the client and the server. The seed is a secret key that is shared between the client and the server. The TOTP algorithm combines the time and the seed to generate a unique and short-lived OTP that can be used for two-factor authentication.
NEW QUESTION # 30
Which EAP method is known as the outer authentication method?
- A. EAP-TLS
- B. EAP-GTC
- C. PEAP
- D. MSCHAPV2
Answer: C
Explanation:
PEAP is known as the outer authentication method because it establishes a secure tunnel between the client and the server using TLS. The inner authentication method, such as EAP-GTC, EAP-TLS, or MSCHAPV2, is then used to authenticate the client within the tunnel.
NEW QUESTION # 31
How can a SAML metada file be used?
- A. To correlate the IDP address to its hostname
- B. To import the required IDP configuration
- C. To defined a list of trusted user names
- D. To resolve the IDP realm for authentication
Answer: B
Explanation:
A SAML metadata file can be used to import the required IDP configuration for SAML service provider mode. A SAML metadata file is an XML file that contains information about the identity provider (IDP) and the service provider (SP), such as their entity IDs, endpoints, certificates, and attributes. By importing a SAML metadata file from the IDP, FortiAuthenticator can automatically configure the necessary settings for SAML service provider mode.
NEW QUESTION # 32
You are the administrator of a global enterprise with three FortiAuthenticator devices. You would like to deploy them to provide active-passive HA at headquarters, with geographically distributed load balancing.
What would the role settings be?
- A. One standalone and two load balancers
- B. Two cluster members and one load balancer
- C. Two cluster members and one backup
- D. One standalone primary, one cluster member, and one load balancer
Answer: D
Explanation:
To deploy three FortiAuthenticator devices to provide active-passive HA at headquarters, with geographically distributed load balancing, the role settings would be:
One standalone primary, which acts as the master device for HA and load balancing One cluster member, which acts as the backup device for HA and load balancing One load balancer, which acts as a remote device that forwards authentication requests to the primary or cluster member device
NEW QUESTION # 33
Which two protocols are the default management access protocols for administrative access for FortiAuthenticator? (Choose two)
- A. Telnet
- B. HTTPS
- C. SNMP
- D. SSH
Answer: B,D
Explanation:
HTTPS and SSH are the default management access protocols for administrative access for FortiAuthenticator. HTTPS allows administrators to access the web-based GUI of FortiAuthenticator using a web browser and a secure connection. SSH allows administrators to access the CLI of FortiAuthenticator using an SSH client and an encrypted connection. Both protocols require the administrator to enter a valid username and password to log in.
NEW QUESTION # 34
You are the administrator of a large network that includes a large local user datadabase on the current Fortiauthenticatior. You want to import all the local users into a new Fortiauthenticator device.
Which method should you use to migrate the local users?
- A. Import users from RADUIS.
- B. Import users using a CSV file.
- C. Import the current directory structure.
- D. Import users using RADIUS accounting updates.
Answer: B
Explanation:
The best method to migrate local users from one FortiAuthenticator device to another is to export the users from the current device as a CSV file and then import the CSV file into the new device. This method preserves all the user attributes and settings and allows you to modify them if needed before importing. The other methods are not suitable for migrating local users because they either require an external RADIUS server or do not transfer all the user information. Reference: https://docs.fortinet.com/document/fortiauthenticator/6.4/administration-guide/372409/user-management
NEW QUESTION # 35
......
NSE6_FAC-6.4 Exam Practice Materials Collection: https://braindumps2go.actualpdf.com/NSE6_FAC-6.4-real-questions.html
