VALID HPE6-A66 Exam Dumps For Certification Exam Preparation
HPE6-A66 Dumps PDF 2023 Strategy Your Preparation Efficiently
HP HPE6-A66 (Aruba Certified Design Associate) Certification Exam is designed for IT professionals who want to prove their expertise in designing and deploying Aruba wireless networks. Aruba Certified Design Associate Exam certification exam is an essential requirement for professionals who want to work with Aruba's enterprise-level wireless solutions. Aruba is a leading provider of advanced networking solutions, and this certification exam is one of the most sought-after credentials in the IT industry.
HP HPE6-A66 certification exam is a professional certification that is designed to test an individual's knowledge and skills in wireless network design using Aruba products and solutions. It is an internationally recognized certification that is highly respected in the industry, and it is an essential certification for anyone who wants to work with Aruba products and solutions. HPE6-A66 exam covers a wide range of topics related to wireless network design and planning, and it requires a solid understanding of Aruba's products and solutions.
NEW QUESTION # 21
NewRocket requires a wireless capacity design 30 Aruba 510 APs will be connected to each wiring closet using SmartRate connections. Wireless coverage needs to be provided even if a POE+ switch loses power Because of security concerns, wired video cameras were recently installed throughout the facility. There are 12 of these per floor. 6 per wiring closet. The cameras are 802.11n WiFi capable and have power injectors from which to draw power.
Based on the POE+ needs of the mentioned devices, which solution would meet the POE+ requirements while still providing a redundant and cost-effective Wi-Fi solution for the devices that require POE+ for Building 1, Floor 2?
- A. Two 2930M 24-port POE+ switches
- B. One 2930M 48-port POE+ switch
- C. One 3810M 40G 8 HPE Smart Rate switch
- D. Two 2930F 24-port POE+ switches
Answer: B
NEW QUESTION # 22
Which feature does the Aruba AP 387 support?
- A. 60GHZRF
- B. Indoor usage
- C. included external directional antennas
- D. 802.11 ax
Answer: A
NEW QUESTION # 23
When determining a customer's agenda and clarifying their expectations for a new HPE/Aruba deployment, which two questions should be asked during the stakeholder checklist? (Select two.)
- A. Which help desk system is deployed?
- B. What business problems are you trying to solve?
- C. What is the networking experience of onsite personnel?
- D. What is your anticipated growth of the environment?
- E. is a request for proposal or actual bill of materials (BOM) required?
Answer: B,E
NEW QUESTION # 24
A customer has over 100 access layer switches. The customer requires user authentication done via the Aruba Dynamic Segmentation feature. What components are required to implement this solution? (Select two.)
- A. Active Directory server
- B. Aruba APs
- C. enterpnse authentication server
- D. Aruba mobility controller
- E. AirWave server
Answer: D,E
NEW QUESTION # 25
A customer is designing a new wired network. The customer requires 50 Gbps uplinks, VSF logical switching, and smart rate port support Which of the following switches would meet these requirements?
- A. 5400R series
- B. 8300 series
- C. 6300 series
- D. 3810M series
Answer: D
NEW QUESTION # 26
What is the main key for a network design to ensure users have a good experience running their applications'?
- A. Provision adequate bandwidth.
- B. Provide appropriate AP density.
- C. Determine the number of users per location.
- D. Implement appropriate security controls
Answer: B
NEW QUESTION # 27
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards. What type of survey should the network architect perform?
- A. Active
- B. Virtual
- C. Passive
- D. Spectrum clearing
Answer: A
NEW QUESTION # 28
Refer to the exhibit.
When planning the use of Cat7 cabling for a SmartRate connection between an ArubaOS AP and an ArubaOS switch, which sections should be considered when calculating distance?
- A. A + B + C
- B. A + B + C + D
- C. A + C
- D. A + B
Answer: B
NEW QUESTION # 29
A customer currently has sets of three Aruba 5406R switches deployed for an access layer in multiple wiring closets in a building They are clustered in a VSF domain The customer wants to set up Multiple Active Detection (MAD) for the OOBM port, as well as use this port for remote management access. To simplify the connectivity, the customer wants to connect these three switches' OOBM ports to a separate switch in the wiring closet for the OOBM connectivity.
Which would be the most cost-effective solution that would meet the customer's requirements?
- A. 0
- B. 2930F
- C. 5406R
- D. 2930M
Answer: A
NEW QUESTION # 30
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- A. roaming between APs
- B. providing consistent performance on all available channels
- C. encountering RF interference by devices
- D. implementing adequate security measures to ensure PCI compliance
- E. determining the RF channel bandwidth consumed per Barcode scanner
Answer: B,D
NEW QUESTION # 31
Which must you perform in IRIS to assign a device to a Design Group?
- A. Right-click the device and select Set Design Group
- B. Drag and drop the device into the Site
- C. Right-click the device and select Set Layer Membership
- D. Drag and drop the device into the Design Group
Answer: D
NEW QUESTION # 32
NewStellar has a main corporate campus in a business park with two adjacent buildings that are 150 feet apart (46 meters). This is an open campus with no obstructions between the two buildings Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters) The network architect has given one floor to analyze. Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply, and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters).
The company has determined that Wi-Fi coverage will not include the central area of each floor, which includes the washrooms, stairs, elevators and supply and network cabinets. Based on a capacity design, approximately how many APs should a network architect add to each floor to plan the design in VisuaiRF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 33
A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.
- A. Two 7205 mobility controllers in a cluster
- B. Given this information, which Aruba solution would be the most cost-effective while still meeting the customer's requirements? O An IAP cluster per floor
- C. A standalone 7008 controller per floor
- D. Two 7030 mobility controllers in a cluster
Answer: B
NEW QUESTION # 34
A network architect is redesigning a wireless network. The architect begins by analyzing the number of spatial streams supported by APs of various vendors as well as the wireless devices currently in the network, if the company wants to ensure that new wireless design, including user wireless devices, support Multi-User MIMO (MU-MIMO). which standard or standards must the wireless products support?
- A. Only 802.11ax,802.11ac, 802.11n, and 802.11a
- B. Only 802.11ax and 8011.ac
- C. Only 802.11ax,802.1lac, and 802.l1n
- D. Only 802.11ax
Answer: C
NEW QUESTION # 35
A customer has some employees that travel to various locations, where these employees will need Wi-Fi access at these locations. Because many of these locations do not have wireless support, the employees will need to carry an AP solution with them. Internet connectivity, if it doesn't exist at these locations, will be provided by a national phone company USB wireless card which will be connected to AP. The wireless solution needs minimal bandwidth, but needs to minimally support 802.1 lac wave 1 devices.
Which Aruba AP wireless solution would meet the needs of these employees most effectively and cost efficiently?
- A. 303H
- B. 203R
- C. 0
- D. 1
Answer: B
NEW QUESTION # 36
Which IRIS option will automatically create a project with a blank preconfigured Site-1 ?
- A. New Project
- B. New Site
- C. New Express Mode
- D. New Campus
Answer: D
NEW QUESTION # 37
A network architect needs to plan a new wireless network
- A. Airwave, Central, Windows, Mac OSX, and Linux
- B. Central only
- C. Airwave and Central only
- D. Airwave, Central, and Windows only
Answer: C
NEW QUESTION # 38
A university department has a program in video processing and editing. Students in the department use Wi-Fi to interact with the video servers. The editing and processing is done by the students accessing and using the video servers. However, the students must then stream their results, via Wi-Fi to their laptops to verify the results. A network architect has determined that no more than 20 APs will be needed for the Wi-Fi solution. Because of the large amount of bandwidth used during the streaming, the Aruba mobility controller solution will need to support 10 Gbps links.
Which solution would cost-effectively meet this customer's requirements?
- A. 0
- B. 1
- C. 2
- D. 7240XM
Answer: B
NEW QUESTION # 39
A network architect is redesigning the access layer in a data center for a customer. The access layer requires fixed-port switches that support VSF and data center features like L2 VXLAN and REST-API Which switching solution should the network architect recommend?
- A. 2930F
- B. 0
- C. 1
- D. 3810M
Answer: A
NEW QUESTION # 40
A customer has a need to track traffic patterns and anomalies on a pair of ArubaOS-CX 8400 series switches. Which technology will the customer need to deploy for these switches?
- A. Network Analysis Engine
- B. NetEdit
- C. Mobility First
- D. 2 CiearPass
Answer: B
NEW QUESTION # 41
A company is installing Internet of Things (loT) devices to support a smart and energy-efficient environment for a building, including loT devices for heating and air conditioning, lights, and window shades. loT devices of these types are typically classified as which category of devices?
- A. Highly mobile devices (HMD)
- B. Nomadic devices
- C. Somewhat mobile devices (SMD)
- D. Stationary devices
Answer: B
NEW QUESTION # 42
Which feature does the Aruba AP 555 support? (Select two.)
- A. desk wall plate mounted
- B. 802.11ac and lower standards only
- C. three radios
- D. weather proof and temperature hardened
- E. high density indoor locations
Answer: B,E
NEW QUESTION # 43
......
HP HPE6-A66 (Aruba Certified Design Associate) Certification Exam is designed to assess the skills and knowledge required to design Aruba wireless networks. Aruba Certified Design Associate Exam certification is ideal for professionals who are interested in designing and implementing wireless networks using Aruba technology.
Latest Verified & Correct HPE6-A66 Questions: https://braindumps2go.actualpdf.com/HPE6-A66-real-questions.html
